Everything for your yard between a rock and a hardscape.

         
  Walls & Caps
         
  click images to enlarge    
 
         
 
         
 
         
 

CT Fieldstone & Meadow Wall

  • Looks like natural fieldstone
  • Makes beautiful corners - finished on 3 sides
  • Easy to build Garden Edgers, Walls, & Piers
  • Beautiful definition & color blends (all the way through the block)
  • Build a 27"H x 21" Sq Pier with just 24 blocks!
  • Finished in a fraction of the time it takes to create a traditional wall
  • Use wall adhesive or mortar to tie the blocks and courses together
  • Cut with skill saw with masonry blade
  • Easy to handle

Building a Double-Faced Wall

  1. Measure desired wall length and place stakes at each end
  2. Excavate earth to a depth of 4" - 6"
  3. Excavate to a width of the block or to a width of two blocks plus an additional 6" for added stability
  4. Compact bottom of trench with hand tamper
  5. Add 1" - 2" of base gravel and tamp. Repeat until depth of trench is 2"
  6. Add 1/2" of Paver Sand and screed until level
  7. Tie string to end stakes at sand height to ensure that base is level
  8. Beginning at the lowest point and the center of the trench, place wall stones in paver sand
  9. Level wall stones both front-to-back and side-to-side
  10. Use PL 300 Glue or mortar to tie blocks and courses together
  11. Recommended overall double-faced wall height not exceed to 24"
  12. Finish by capping with optional wall caps. Secure caps with cap glue or mortar
  13. Double sided walls can be used as open running walls, edging walls...

Building a Single-Faced Wall

  1. Follow installation directions as stated above
  2. Use the blocks as a single-faced wall for applications such as edging rows
  3. Maximum height for single-faced rows should not exceed three courses
  4. Single-faced walls can also be capped
  5. Wall caps for single-faced walls require that you cut the wall caps in half lengthwise using a standard masonry saw
How Much Do I Buy?
(Stones required per square foot of wall surface area)
# of courses

Wall Height

Wall Length
5'
10'
15'
20'
25'
# of Blocks
1
4.5"
3.5
7
10.5
14
17.5
2
9"
7
14
21
28
35
3
13.5"
10.5
21
31.5
42
52.5
4
18"
14
28
42
56
70
5
22.5"
17.5
35
52.5
70
87.5

Wall Caps

  • Natural bluestone finish
  • Use to cap the double-sided wall or cut in half for a single-sided wall or edger
  • Use skill saw with masonry blade to cut caps in half lengthwise to cap a single-sided wall or garden edger
  • Use wall adhesive or mortar to glue the cap to the top of the wall
  • Use as walkways / stepping stones - just put them face-up on the ground

 

 
         

Landscape & Masonry Products
1-866-4HARDSCAPES (866-442-7372)
Seekonk / Rehoboth‚ Bourne on Cape Cod